KILSEN

The FD710RVDS consists of an infrared transmitter and receiver in one single compact housing. The infrared signal is reflected by a prism and analysed for smoke presence.

1,180.00

The FD705RVDS consists of an infrared transmitter and receiver in one single compact housing. The infrared signal is reflected by a prism and analysed for smoke presence.

920.00

The 400 Series modules consists of a complete range of interfaces developed for input/output control in the KSA700/FP1500 analogue fire systems from GE Interlogix. The KAL426 allows for the connection and control of one extinguishing area to the addressable fire panel loop.

320.00

Provides for four potential free relay outputs for the fire system loop. Each relay allows for COMMON, NORMALLY OPEN and NORMALLY CLOSED contacts. The outputs may be used to activate ventilation controls, warning signs, activation of other alarm devices etc. during fire situations.

182.00

Allows the connection of four conventional zones to the analogue fire system loop. These zones are constantly monitored. Up to 20 conventional devices may be connected to any zone.

Specifications

170.00

Allows for the supervision of a single, 24 Volt powered output contact on the fire system loop. This unit may be used to control for e.g.

140.00

Provides a remote input and a potential free voltage relay output to the fire system loop. The input signal is constantly monitored and its status displayed on the control panel, whilst the output is fail-to-safe. Auxiliary supply monitoring is also included.

134.00
114.00

Allows the connection of one conventional zone to the analogue fire system loop. This zone is constantly monitored. Up to 20 conventional devices may be connected to this zone.

Specifications

110.00

The SK08A loop powered sounder is designed for connection to and control by the KSA700/FP1500 addressble fire detection systems from GE Security. It is designed for indoor use only. Communication is done digitally between the fire panel and the sounder.

100.00

Provides for one potential free relay output for the fire system loop. Each relay allows for COMMON, NORMALLY OPEN and NORMALLY CLOSED contacts. The output may be used to activate ventilation controls, warning signs, activation of other alarm devices etc. during fire situations.

96.00

Provides a remote input to the fire system loop. The input is constantly monitored and its status communicated to the fire control panel. The input may be activated by closing or opening a potential free contact, depending on the module configuration.

96.00

The KL700A Series uses a microprocessor for measurement and communication. An enhanced protocol ensures the overall integrity and error free operation of the fire system, without compromising speed.

94.00

The KAL400 Series consists of a complete range of interfaces developed for input and output control in the KSA700 and FP1500 addressable fire systems from GE Security. The KAL455 is an addressable manual call point for manual fire activation.

90.00

The KL700A Series uses a microprocessor for measurement and communication. An enhanced protocol ensures the overall integrity and error free operation of the fire system, without compromising speed.

74.00

Pages

Subscribe to KILSEN