Modules

The UniPOS-Intellect software solution is used for applications where graphical information and video surveillance of the fire and fault events are required.
€1,400.00
The interface module RS-LAN is an auxiliary device for establishment the communication of Fire Control Panels, manufactured by UniPOS with a personal computer through the internet network. The operation of the module is ensured by software, including not only the
€350.00
The Interface Module RS232/485 is fully compatible with the FS5100 and FS5200 UniPOS conventional panels. Applicable for PC application and Conventional Network Repeater integration.
€95.00

Addressable module της GST στην είσοδο του. Δέχεται έως 15 συμβατικές συσκευές τις οποίες τις αναγγέλει ως ένα διευθυνσιοδοτημένο σημείο στην μονάδα. Ο προγραμματισμό γίνεται μέσο του programmer P-9910B. Διαθέτει ενδεικτική λοχνία Alarm - Faull Διαστάσεις: 120mm x 80mm x 43mm.

€74.00

Διευθυνσιοδοτούμενο module 1 εισόδου για addressable πίνακες σειράς GST. Δέχεται στην εισοδό του ένα σήμα Normaly open από οποιοδήποτε συσκευή και το μεταδίδει μέσω του βρόγχου στον πίνακα. Διαθέτει ενδεικτικό LED ενεργοποίησης και Fault. Διαστάσεις: 60 x 120mm x 80mm x 43mm.

€60.00

Προγραμματιστής χειρός για τον προγραμματισμό διευθυνσιοδοτημένων κεφαλών πυρανίχνευσης της KILSEN. 

€360.00

The 400 Series modules consists of a complete range of interfaces developed for input/output control in the KSA700/FP1500 analogue fire systems from GE Interlogix. The KAL426 allows for the connection and control of one extinguishing area to the addressable fire panel loop.

€320.00

Provides for four potential free relay outputs for the fire system loop. Each relay allows for COMMON, NORMALLY OPEN and NORMALLY CLOSED contacts. The outputs may be used to activate ventilation controls, warning signs, activation of other alarm devices etc. during fire situations.

€182.00

Allows the connection of four conventional zones to the analogue fire system loop. These zones are constantly monitored. Up to 20 conventional devices may be connected to any zone.

Specifications

€170.00

Allows for the supervision of a single, 24 Volt powered output contact on the fire system loop. This unit may be used to control for e.g.

€140.00

Provides a remote input and a potential free voltage relay output to the fire system loop. The input signal is constantly monitored and its status displayed on the control panel, whilst the output is fail-to-safe. Auxiliary supply monitoring is also included.

€134.00
€114.00

Allows the connection of one conventional zone to the analogue fire system loop. This zone is constantly monitored. Up to 20 conventional devices may be connected to this zone.

Specifications

€110.00

Provides for one potential free relay output for the fire system loop. Each relay allows for COMMON, NORMALLY OPEN and NORMALLY CLOSED contacts. The output may be used to activate ventilation controls, warning signs, activation of other alarm devices etc. during fire situations.

€96.00

Provides a remote input to the fire system loop. The input is constantly monitored and its status communicated to the fire control panel. The input may be activated by closing or opening a potential free contact, depending on the module configuration.

€96.00
Subscribe to Modules